How to provision a SPA9xx VOIP phone

To set up a Cisco / Linksys SPA9xx phone that we have created a provisioning file for, please do the following:

  1. Press the button on the phone that looks like a page with a folded over corner
  2. Scroll down and select network
  3. Note the IP address
  4. Open a web browser. Enter the following URL into your web browser, (replacing the IP address with the appropriate address) http://192.168.1.100/admin/resync?http://c-prov-01.conversant.co.nz/spa$PSN.cfg

After a few reboots the phones will be setup and ready. To confirm this:

  1. Check that there is a solid black phone icon on the top right of the phone display
  2. Pick up the handset and you should hear a dialtone

This information applies to the following phone models:

  1. SPA921
  2. SPA922
  3. SPA941
  4. SPA942
  5. SPA962