D-Link DVG-1402S
The D-Link DVG-1402S router can be configured to work with Conversant. Once you have verified the router is setup correctly and you can connect to the Internet through it then follow these steps to setup your VoIP lines:
1. Click on the ‘VoIP settings’ button and under ‘SIP Configuration’ select ‘Server Configuration’:
- Server FQDN: Enabled
- Domain Name: conversant.co.nz
- Port: 5060
- Secondary Server FQDN: Disabled
- Outbound Proxy State: Enabled
- Outbound Proxy FQDN: Disabled
- Outbound Proxy IP Address: proxy.conversant.co.nz
- Outbound Proxy Domain Name: proxy.conversant.co.nz
- Outbound Proxy Port: 5060
- Register Expiration: 360
- Codec Priority: 1st. G.729a, 2nd. G711 a-law, 3rd. G711 u-law (G.726 unused)
2. Next click on 'User Agent' under the 'SIP Configuration' settings:
- Same Phone Number: Disabled (Enabled if you only have 1 phone/number to configure)
- Index: 1/2 (Depending on which line you want to configure)
- Phone Number: your Conversant VoIP username
- Display Name: Your Name
- User Agent Port: 5060
- Authentication Username: your Conversant VoIP username
- Password: your Conversant VoIP password
- Retype Password: your Conversant VoIP password
3. Next click on 'Telephony' under the 'SIP Configuration' settings. Here are the main user agent settings you need to specify.
- Index: 1 and 2 (Configure both lines as follows)
- DTMF Method: RFC2833
- Payload Type: 101
- VAD: Disabled